Stanley FATMAX SFMCE530 Original Instructions Manual Download Page 6

6

ENGLISH

(Original instructions)

materials:

u

 

Do not apply heat to the same place 

for a long time;

u

 

Do not use in presence of an explosive 

atmosphere;

u

 

Be aware that heat may be conducted 

to combustible materials that are out of 

sight.

u

 

Do not leave the appliance unattended 

when it is switched on.

u

 

Do not obstruct either the air intake 

slots or the nozzle outlet as this may 

cause excessive heat build up 

resulting in damage to the appliance.

u

 

Do not direct the hot air flow at other 

people or animals.

u

 

Do not touch the nozzle as it becomes 

very hot during use and remains hot 

for up to 30 minutes after use.

u

 

Do not place the nozzle against any 

object during or immediately after use.

u

 

Do not poke anything down the nozzle 

as it could give you an electric shock.

u

 

Do not look down the nozzle while the 

appliance is switched on.

u

 

Do not use the appliance as a 

hairdryer! The air temperature is far 

higher than a hairdryer.

u

 

Ensure adequate ventilation during 

use as toxic fumes may be produced.

u

 

Do not use the appliance in a damp 

atmosphere.

u

 

When stripping paint, ensure that the 

work area is enclosed. Wear a dust 

mask specifically designed for 

protection against lead paint dust and 

fumes and ensure that persons within 

accidentally occurs, flush with 

water. If liquid contacts eyes, 

additionally seek medical help. 

Liquid ejected from the battery may 

cause irritation or burns.

6. Service

a. Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts. This will 

ensure that the safety of the power tool 

is maintained.

b. Never service damaged battery 

packs. Service of battery packs should 

only be performed by the manufacturer 

or authorized service providers.

Additional power tool safety 

warnings

@

Warning! Additional safety 

warnings for heat guns

Warning! Do not use outdoors, indoor 

use only.

Warning! This appliance is not intended 

for use by persons (including children) 

with reduced physical, sensory, or mental

capabilities, or lack of experience or 

knowledge, unless they have been given 

supervision or instruction concerning use 

of the appliance by a person responsible 

for their safety.

Warning! Children should be supervised 

to ensure that they do not play with the 

appliance.

Warning! A fire may result if the 

appliance is not used with care, therefore 

be careful when using the appliance in 

places where there are combustible 

Summary of Contents for FATMAX SFMCE530













Reviews: