J
J
L
1
2
Fasten Wall Supports (J)
to Right Hand Wall
●
Position Wall Supports
J
over anchors
and attach using two screws in each
bracket with a Phillips head screw driver.
●
Prepare Hanger Bar Brackets
L
by loosen-
ing large hex screw with 4mm hex
wrench until washer on back is at end of
screw.
●
Place one bracket
L
on each Wall Support
J
and two brackets on tower Vertical
Support. Align Wall Support brackets to
Vertical Support brackets and tighten hex
screw.
Note: To avoid bracket slipping make sure
washer swivels under Vertical Support flanges
before tightening.
.
4mm
2
6
Measure Distance Between
Right Side Hanger Brackets (L)
Measure inside surfaces (see Top View)
between Top Hanger Bar Brackets
L
as
shown. A ladder or stepstool may be neces-
sary to measure top brackets. Repeat for
Bottom Hanger Bar.
Top View
L
L
L
L
7
Deluxe Kit Inst 9/16/2004 11:01 AM Page 8
