Vertical Support Installation
to Back Wall and Floor
Attachment of Hook and Loop fastener. For
tile, wood or linoleum flooring remove paper
backing from hook and loop fastener on the
bottom of the vertical support. (see inset) For
carpet remove loop section of fastener leav-
ing hooks exposed. (see inset) Place vertical
support foot over marks on floor and press to
secure. Align return
A
with anchors
attach using two screws with a Phillips
head screwdriver. If using optional floor
screws repeat procedure attaching screws
into anchors or directly into floor depending
on your floor type.
2
2
A
C/E
F
F
M
2
4mm
1
4mm
To lock
shelf...
B/D
2
To move
brackets...
Install Shelves (F)
Loosen all Shelf Brackets
M
using 4mm
hex wrench as shown. Working from the
bottom up, slide shelves into brackets until
cut edges touch back wall. Tighten. Hold
Vertical Supports and shelves together while
tightening brackets. Repeat for remaining
shelves.
To reposition shelves, loosen Shelf
Bracket
M
until hex nut on inside surface of
bracket is exposed. Loosen inside hex nut
until bracket moves freely. Position bracket
and tighten inside hex bolt with 4mm
wrench to secure.
Note: To avoid bracket slipping make sure
washer swivels under Vertical Support
flanges before tightening.
3
4
1
For Hard Floors
For Carpet
Deluxe Kit Inst 9/16/2004 11:01 AM Page 6
