manualshive.com logo in svg

Stanley CO25, User Manual

Share
Download
Stanley CO25 User Manual Download Page 17

CO25 

User

 Manual ◄ 17

5. Adjust the cable lock and the adjustment screw on 

the control lever on the handle to acquire the correct 

trigger control. Additional full trigger movement can be 

attained by moving the cable to a different hole location 

on the trigger plate (see below).

NOTE:

The safety catch on the cut-off saw must be de

-

pressed by the safety latch plate at all times for the 

trigger to operate.

6 Before operating the cut-off saw and before attaching 

any hydraulic power source check that the wheel guard 

on the cut-off saw is in place and that the cutting wheel 

is secure.

NOTE:

If the saw is to be removed from the cart and used 

in a hand-held manner, make sure to re-attach the 

tubular handle to the cutting head body before 

using.

SAW CART ASSEMBLY / OPERATION

Saw cart operating 

instructions

• For operation of the attached tool (saw motor) and power 

source, consult the respective operating manuals before 

you begin.

• Follow all safety precautions in this manual along with any 

respective manuals relating to attached tools and power 

sources.

• When you are ready to cut, align the cut line indicator on 

the line to be cut.

• Make sure the water hose and its connections are secure 

and the water coolant is flowing easily.

•To engage the motor and blade, slowly squeeze the hand 

control lever.

• Slowly and safely descend the blade into the cutting sur-

face to the desired depth by turning the depth control crank 

counter-clockwise.

•Move slowly and safely forward along cutting line until 

desired cut is achieved.

• Disengage the motor and blade by releasing the hand 

control lever.

•After the blade has stopped rotating, lift the blade out of 

the cutting surface by turning the depth control crank clock-

wise until the blade is safely clear of the surface.

•When operation is complete, turn off power source and 

disconnect hoses.

Maintenance

1. Item 24 on the parts illustration page of the slab saw 

cart manual is a grease fitting, apply grease once a month 

under normal use or twice a month under heavy use.

2. Lubricate all moving parts weekly with a general lubri-

cant.

Cable Guide

Cable Lock

Trigger Plate

Cable Adjustment 

Holes

Safety Latch 

Plate

Summary of Contents for CO25

























Reviews:

No comments

Brands by name

Popular brands

Load more brands