CO25
User
Manual ◄ 15
SAW CART ASSEMBLY
SAW CART ASSEMBLY INSTRUCTIONS
1. Your slab saw cart comes fully assembled from the fac-
tory, the only adjustments necessary may be the throttle
cable after the cut-off saw has been installed.
2a. When mounting the cut-off saw to the saw cart, the tu-
bular handle attached to the cut-off-saw must be removed.
This will allow the cut-off-saw to be mounted on the saw
cart.
Remove this handle
from the cut-off saw.
2b. Cut-off saw with handle removed shown below.
NOTE:
Prior to mounting the cut-off saw the safety catch on
the cut-off saw must be depressed and is held down by
the safety latch plate on the saw cart at all times for the
trigger to operate. See location of safety latch plate pic
-
tured below and safety catch pictured above.
Cable Guide
Cable Lock
Trigger Plate
Cable Adjustment
Holes
Safety Latch
Plate
Safety Catch
Summary of Contents for CO25
Page 23: ......
