5
NOTE: The fan flue assembly is suit-
able for a 275mm (11”) wall and cannot
be reduced, or extended if it is installed
through a wall less than 275mm (11”)
the terminal will protrude accordingly
and must have fitted a suitable terminal
guard.
Fig.7
NON STANDARD WALL THICKNESS
There is an extended flue assembly available (to
order) that is suitable to be installed through wall
thickness of 368mm (14.5”) 444mm (17.5”) 495mm
(19.5”) and a maximum of 558 (22”).
To reduce the length of the assembly from the max-
imum of 550 (22”) wall thickness, undo the band
retaining the end reducer and remove the reducer
taking care that no damage occurs. Select the thick-
ness required and cut through the assembly on the
inner most of the paired groves. Care must be taken
to cut straight and to remove all sharp edges. Place
the reducer in position at the inner most end of the
flue assembly and fix into position by re-locating the
band on the remaining grove and lock into place.
Install the air duct as normal cutting the flexible liner
to the correct length in accordance with the wall
thickness.
CONTENTS OF KIT:
1.
Fan flue terminal.
2.
Terminal Guard.
3.
Fixing Brackets.
4.
Primary air inlet spigot.
5.
Air inlet duct.
6.
Air Inlet terminal.
7.
Jubilee clips.
8.
M6 Nuts and Bolts (4 No)
10. Junction box and flexible cable tubing.
11. Burner connection cable.
IMPORTANT.
Fan Flue Terminal Kit is
NOT
to be connected to
an appliance burning 35 Sec. class D fuel.
