HOW TO LOAD STAPLES
For best performance, use Stanley-Bostitch
®
standard staples model SBS191/4CP or 26/6
standard staples.
1. Press the magazine release button. The magazine extension will eject outward.
NOTE:
Do not press release button with your face directly in front of the stapler. It
may result in injury.
2. Grasp the magazine extension and pull forward.
CAUTION:
There may be staples in the magazine. Be sure they are in position
before adding up to a full strip of staples. Make sure staple strip is correctly
inserted and properly seated before closing.
3. Push the magazine back into the housing until it is firmly locked in position
NOTE:
To prevent damage to the driver element, the magazine must be completely
pushed back and locked before stapling.
STAPLING
Insert paper directly under magazine. Be sure to cover staple clincher.
All staplers can jam from time to time. To clear a jam, follow these 4 easy steps:
1. Remove AC plug from the outlet before removing jammed staples.
2. Press magazine release button, magazine should eject.
3. Remove any jammed staples from the magazine.
4. Reload and close magazine. Stapler should now function properly.
20
Magazine release button
