2. SPECIFICATIONS
2.1 INTENT OF USE
The AV™10 Installation Tool is principally a piston and cylinder assembly. When coupled hydraulically and electrically to
a compatible hydraulic power source and the relevant nose assembly is attached, it is then used to install 3/8” Avdelok®,
5/16” to 3/8” Avbolt
®
and Ø18mm Avseal
®
II in Industrial Environments.
The placing tool and hydraulic pump unit may only be used in accordance with the operating instructions for placing
Stanley Engineered Fastening structural rivets.
Refer to the table below for the list of applicable fasteners and associated nose equipment. Refer to the datasheets listed in
the table for the relevant nose assembly instructions.
DO NOT
use under wet conditions or in the presence of flammable liquids or gases.
FASTENER
NOSE ASSEMBLY
NOSE ASSEMBLY
DATASHEET
TYPE
SIZE
PART NUMBER
DIM. ‘A’
DIM. ‘B’
PART NUMBER
AVDELOK®
3/8”
73430-03100
87 mm
28 mm
07900-00919
AVBOLT®
5/16”
73430-03300
92 mm
27 mm
07900-00905
3/8”
73430-03200
92 mm
29 mm
07900-00905
AVSEAL® II
16 mm
73430-05000
95 mm
27 mm
07900-00840
16 mm flanged
73430-05000
95 mm
27 mm
07900-00840
18 mm
73430-05200
95 mm
27 mm
07900-00840
Refer to the illustration on page 7 for the identification of the nose assembly dimensions ‘A’ and ‘B’.
The safety instructions must be followed at all times.
2.2 PLACING TOOL SPECIFICATION
SPECIFICATION
METRIC
IMPERIAL
Force:
Pull at stated pull pressure
55.0 kN
12364.0 lbf
Push Off at stated return pressure
26.0 kN
5485.0 lbf
Pressure:
Pull
510 bar
7397 PSI
Return
200 bar
2901 PSI
Stroke:
Piston Stroke
25.0 mm
0.98 in
Weight:
Without nose equipment
3.5 kg
7.7 lb
Hydraulic Oil:
Enerpac® Hydraulic Oil – HF-95X
Product Range:
Avbolt®
10.0 mm
3/8 in
Avseal® II
18.0 mm
Avdelok®
10.0 mm
3/8 in
Additional Features:
Stem Ejection – Front or Rear
Rear
Seal Arrangement
Twin Lip and Wiper Seals
Hydraulic Bearing Rings
Yes – Front and Rear
Protective Handle / Hose Gator
Yes
Protective Hose Guard
Yes
Hose / Cable Retention Clamps
Yes
6
ENGLISH
Summary of Contents for AV 10
