9
Setting the Time & Day (24 Hour Clock)
1.
Press the Power button to turn the unit on.
2.
Press & hold the Time Setting button for two
seconds to display the time & day - see Fig
6 ( no numbers shown as time not set).
3.
Press the Time Setting button & the day
setting will flash - see Fig 7.
4.
Adjust the day setting using the Temp + &
Temp - buttons.
5.
Press the Time Setting button & the hour
setting will flash. Adjust the hour setting
using the Temp + & Temp - buttons.
6.
Press the Time Setting button & the minute
setting will flash. Adjust the minute setting
using the Temp + & Temp - buttons.
7.
Press the Time Setting button to set the time
& exit the time/date set-up.
Setting the Timer
The Timer allows for two ON/OFF periods (M1/M3)
for each day of the week and the timer can be set
using the following procedure:
1.
Press the Power button to turn the unit on.
2.
Press & hold the Timer Mode button for two
seconds to enter the timer settings. The
settings for the 1st ON/OFF period (M1) for
Monday will be shown with the 1st ON time
& hour setting flashing - see Fig
8.
3.
Adjust the hour setting using the Temp + &
Temp - buttons and press the Time Setting
button to select the minute setting. With the
minute setting flashing, adjust the minute
setting using the Temp + & Temp - buttons.
4.
Press the Time Setting button & the display
will move to the 1st OFF time setting - see
Fig 9.
5.
Repeat steps 2 & 3 to set the 1st OFF time.
6.
Press the Time Setting button & the display
will move to the 2nd ON/OFF period (M3)
with the 2nd ON time setting displayed.
7.
Repeat steps 2 to 5 to set the 2nd ON/OFF
period.
8.
Press the Time Setting button & the display
will move to the 1st ON/OFF period (M1) for
Tuesday with the 1st ON time setting dis
played.
9.
Repeat steps 2 to 8 for Tuesday’s settings
and repeat this process for Wednsday to
Sunday’s settings.
10.
Having confirmed Sunday’s settings, exit the
timer settings by not using the remote for 10
seconds and the unit will default into normal
operating mode. To activate the timer
settings, press the Timer Mode buton until
the timer symbol is displayed on the screen -
see Fig 11.
Fig 6
Fig 7
Fig 8
Fig 11
Fig 9
Fig 10
NOTE:
The time & day must be set before the Timer
Mode can be activated.
The unit can still be operated normally when in the
timer mode using the Heater function.
