background image

3

STANLEY APPLIANCE WARRANTY

CONDITIONS OF WARRANTY

Your Stanley Appliance is guaranteed against any part that fails (under normal operating conditions) for a two year peri-
od from the date of installation of the appliance. If the unit is not installed within six months of date of purchase, the
warranty will commence six months from the date of purchase.

All warranty claims must be reported to the Waterford Stanley Service Department and must be submitted with the prod-
uct serial number (located on the front of this manual), date of purchase, proof of purchase (if requested) and details
of the specific nature of the problem.

The warranty is given only to the original consumer/purchaser only and is non-transferable. The appliance must be
installed by a suitable qualified person and installed as per the requirements of the manual. Failure to comply with the
Installation Requirements or Building Regulations will void your warranty. Waterford Stanley reserve the right to replace
any part due to manufacturing defect that fails within the warranty period under the terms of the warranty. The unit must
be used for normal domestic purposes only and in accordance with manufacturer's operation instructions.

LIMITS OF LIABILITY

The warranty does not cover:
*

Bulbs and Batteries.

*

Special, incidental or consequential damages, injury to persons or Property, or any other consequential loss.

*

Any issue caused by negligence, misuse, abuse or circumstances beyond Waterford Stanley’s control.

*

Any issue with wear and tear, modification, alteration, or servicing by anyone other than an authorized service 
engineer.

*

Damage resulting from installation & usage where the appliance has not been installed or used in accordance
with the installation or operation instructions or if the installation does not conform to local building, fire & 
safety regulations.

*

Damage caused to the unit while in transit.

*

Damage caused by storing the unit in a damp, unheated environment.

*

Aesthetic damage & missing parts on units purchased off display.

*

Removal & re-installation costs.

Note:

Adequate clearance must be maintained around the appliance to ensure the ease of part removal in the possi-

ble event of their damage/failure. Waterford Stanley are not responsible for any costs incurred in the removal of items
installed in the vicinity of the appliance that have to be moved to facilitate a part replacement.

Summary of Contents for Argon Arranmore













Reviews: