Stanley 71504, Instruction And Service Manual

Page: 2 / 44

©2021 STANLEY Black & Decker
All rights reserved.
The information provided may not be reproduced and/or made public in any way and through any means (electronically
or mechanically) without prior explicit and written permission from STANLEY Engineered Fastening. The information
provided is based on the data known at the moment of the introduction of this product. STANLEY Engineered Fastening
pursues a policy of continuous product improvement and therefore the products may be subject to change. The information
provided is applicable to the product as delivered by STANLEY Engineered Fastening. Therefore, STANLEY Engineered
Fastening cannot be held liable for any damage resulting from deviations from the original specifi cations of the product.
The information available has been composed with the utmost care. However, STANLEY Engineered Fastening will not
accept any liability with respect to any faults in the information nor for the consequences thereof. STANLEY Engineered
Fastening will not accept any liability for damage resulting from activities carried out by third parties. The working names,
trade names, registered trademarks, etc. used by STANLEY Engineered Fastening should not be considered as being free,
pursuant to the legislation with respect to the protection of trademarks.
CONTENT
1. SAFETY DEFINITIONS 3
1.1 GENERAL SAFETY RULEs 3
1.2 PROJECTILE HARZARDS 3
1.3 OPERATING HAZARDS 4
1.4 REPETITIVE MOTIONS HAZARDS 4
1.5 ACCESSORY HAZARDS 4
1.6 WORKPLACE HAZARDS 4
1.7 NOISE HAZARDS 4
1.8 ADDITIONAL SAFETY INSTRUCTIONS FOR HYDRAULIC POWER TOOLS 5
2. SPECIFICATION 6
2.1 INTENT OF USE 6
2.2 TOOL SPECIFICATION 6
2.3 TOOL DIMENSIONS 6
3. PUTTING IN SERVICE 7
4. OPERATING INSTRUCTIONS 7
5. SERVICING THE TOOL 7
5.1 DAILY SERVICING 7
5.2 WEEKLY SERVICING 7
5.3 ANNUAL SERVICING / EVERY 500K OPERATIONS 7
5.4 SERVICE KIT 7
5.5 HYDRAULIC OIL 8
5.6 DISMANTLING INSTRUCTIONS 8
5.7 PROTECTING THE ENVIRONMENT 8
6. GENERAL ASSEMBLY AND PART LIST 9
6.1 GENERAL ASSEMBLY 9
6.2 PARTS LIST 10
7. SAFETY DATA 10
7.1 HYSPIN VG32 OIL SAFETY DATA 10
7.2 MOLYLITHIUM GREASE EP 3753 - SAFETY DATA 11
7.3 Molykote® 111 GREASE - SAFTEY DATA 11
8. EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY 12
9. UK DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY 13
10. PROTECT YOUR INVESTMENT! 14
2
E N G L I S H O R I G I N A L I N S T R U C T I O N