page 10 of 12
15.
Turn the instrument upside down, and reinstall the bottom cover.
15.1.
Loosely thread the 6 small black screws first.
15.2.
Loosely thread the 4 large black screws.
15.3.
Tighten the 6 small black screws.
15.4.
Tighten the 4 large black screws.
16.
Turn the instrument right side up, and reinstall the top cover.
16.1.
Loosely thread the 6 small black screws.
16.2.
Loosely thread the 4 large black screws.
16.3.
Tighten the 6 small black screws.
16.4.
Tighten the 4 large black screws.
17.
Install a 50Ω terminator, or a shorting cap, onto the A input BNC.
18.
Reconnect the AC power cord, turn on the instrument, and allow 60 minutes to
warm up.
19.
Press the [Save Recall] button to bring up the following screen:
20.
Touch the “Recall default” tile on the screen to restore default settings. Touch the
“Confirm” tile on the screen that pops up to confirm restoring default settings.
21.
Press the [Couple] button to set DC coupling.
