8
Knee Adjustment
8.1 Stance Flexion Adjustment
Important! adjustments to Stance
Flexion Bumper screws need to be
symmetrical! Apply thread locker to
screws one at a time to prevent
screw backing out.
Stance flexion adjustment screws are
located on the anterior body of the knee
and can be adjusted with a 5mm wrench.
Turning both screws clockwise decreases
the 5th axis motion, reducing the stance
flexion angle. Anti clockwise will increase
5th axis motion, increasing the stance
flexion angle. Adjustments need to be
symmetrical!
Adjust screw with 6mm wrench:
Clockwise to increase extension assist
Anti clockwise to reduce extension assist
8.2 Extension Assist Adjustment
Note: Loosen set screw prior to
adjusting.
Note: Tighten set screw after
adjusting.
NOTE: Stance Flexion set
screws have been eliminated.
The threaded holes remain, but
will not contain a screw.
It is not recommended to adjust the head tilt feature of this
knee, as it will possibly interfere with the lock mechanism.
Adjustment can lead to lock not engaging, or to lock damage
which will void the warranty!