Stander PR60231 Instructions Download Page 3

Page: 3 / 4

4. Determine which side of bed to install the Bed Rail. Slide the Assembled Base

between the Mattress and Box Spring of the bed, as shown in Figure 4.

FIGURE 4

5. Secure the SAFETY STRAP to the bed frame, as shown in Figure 5. Unbuckle strap

and loop strap around bed frame and re-buckle. Tighten strap to secure Base
Assembly against the mattress.

FIGURE 5

6. Align the MAIN HANDLE so the extension side of the bed rail is closest to the foot of

the bed, as shown in Figure 6.

FIGURE 6

Summary of Contents for PR60231

Page 1: ...uct before it is installed or used These warnings as well as the assembly instructions must be carefully followed to ensure that the product is properly installed and used Failure to install or use th...

Page 2: ...are included as shown in Figure 1 FIGURE 1 2 Use the Allen Head Wrench to attach the CONNECTION TUBE to the BASE TUBES using the SHORT BOLTS and WASHERS as shown in Figure 2 and Figure 3 FIGURE 2 3 Sl...

Page 3: ...Figure 4 FIGURE 4 5 Secure the SAFETY STRAP to the bed frame as shown in Figure 5 Unbuckle strap and loop strap around bed frame and re buckle Tighten strap to secure Base Assembly against the mattre...

Page 4: ...degrees to lower bed rail as show in Figure 8 FIGURE 8 WARNING For safety purposes the Bottom horizontal bar of the Bed Rail should be below the top of the bed mattress as shown in Figure 9 A gap bet...