manualshive.com logo in svg

Standart Horizont CP190i, Owner'S Manual, Page: 72 / 123

Share
Download
Standart Horizont CP190i Owner'S Manual Download Page 72

Page 74

CP190i

12. PAGES

The CP190i has many pages that are designed to ease your navigation.

Figure 12 - Example of screen display pages

The pages can be selected in the following way:
1. Press 

[MENU]

. The following menu is shown on the screen:

Figure 12a - Main Menu

2. Move the ShuttlePoint knob to highlight the desired page and press

 [ENT]

.

12.0 CHART PAGE

The Chart page is the main page of the GPS Chart Plotter. From this page the user can zoom
in/out, pan around the chart, show information about cartographic objects, see the exact
vessel position with the COG and SOG, place points, GOTO a destination point, show Track
history etc.
It is possible to set the chart as a single or two charts side by side.
1. Press 

[MENU]

, move the ShuttlePoint knob to highlight 

CHART 

and press 

[ENT]. Two

Chart page types are available: Single and Dual.

2. Move the ShuttlePoint knob to highlight 

Single

 or 

Dual

 and press

 [ENT]

.

Summary of Contents for CP190i




























































































































Reviews:

No comments