WS150 User Manual
7
4 Installation
4.1 Location
The WS150 is designed for above or below deck
installation. Select a position that is:
•
At least 12 inches (300mm) from a compass
•
At least 20 inches (500mm) from any radio
•
Easy to read by the helmsman and crew
•
Protected from physical damage
•
Accessible to electrical cable connections
4.2 Mounting
The mounting surface must be flat. Use the template
to set the center of the fixing hole.
1
Drill a 1¼" (32mm) diameter mounting hole
through the bulkhead.
2
Remove the nut. Peel the protective paper
off the foam gasket and attach the gasket to
the rear of the instrument.
3
Insert the instrument through the bulkhead.
Hand tighten the nut and then finally tighten
with a spanner. Do not over tighten so that
the water sealing ability of the gasket is
damaged.
3 Accessories
3.1 Replacement Parts
The following parts may be ordered from the Standard Horizon Parts Department.
To order, call: 562-404-2700 Ext 351
Part ........................................................................................................................................... Part Number
Dust Cover .......................................................................................................................................... DC150
Extension Cable .................................................................................................................................... HS50
Junction Box .............................................................................................................................. M13349001A
Masthead assembly .................................................................................................................. M13349004A
Masthead Cable Assembly (100 feet long) ............................................................................. M13349005A
Panel Gasket .............................................................................................................................. 108013023A
Tricup Assembly ....................................................................................................................... M13349002A
Wind Vane Assembly ................................................................................................................ M13349003A
