background image

WS150 User Manual

4

Contents

1 General Information ............................................................................................ 6

1.1 Introduction ................................................................................................. 6

2 Controls and connectors .................................................................................... 6

1.2 Front panel ................................................................................................. 6
1.3 Rear panel .................................................................................................. 6

3 Accessories ........................................................................................................ 7

3.1 Replacement Parts .................................................................................... 7

4 Installation ........................................................................................................... 7

4.1 Location ...................................................................................................... 7
4.2 Mounting ..................................................................................................... 7
4.3 Wiring Connection ..................................................................................... 8
4.4 Multiple Instruments .................................................................................. 9
4.5 Masthead installation ................................................................................ 9

4.5.1 Junction Box Installation .................................................................................... 9
4.5.2 Masthead Cable Installation ............................................................................... 9

4.6 Calibration ................................................................................................ 11

4.6.1 Linearization of the Wind Sensor and Instrument ........................................... 11
4.6.2 Wind Direction Calibration ................................................................................ 11
4.6.3 Wind Speed Calibration .................................................................................... 12
4.6.4 Wind Direction Damping ................................................................................... 12

4.7 Microprocessor Reset. ............................................................................ 12

5 Operation .......................................................................................................... 12

5.1 Backlighting On / Off ................................................................................. 12
5.2 Wind Speed Alarm On/Off ........................................................................ 12
5.3 Set Wind Speed Alarm ............................................................................. 13
5.4 True or Apparent Wind Display ............................................................... 13
5.5 Select Speed Function ............................................................................. 13
5.6 Select Speed Units .................................................................................. 13
5.7 Reset Maximum Wind Speed .................................................................. 13

6 Maintenance ...................................................................................................... 13

7 Specifications ................................................................................................... 14

8 Troubleshooting ............................................................................................... 14

Summary of Contents for WS150















Reviews: