Standard Horizon PHANTOM PS1000, Owner'S Manual

Page: 37 / 68

Page 37 Phantom PS1000
11. Repeat step 10 as many times as necessary to com-
plete the MMSI code (nine digits).
12 Press and hold the [ CALL
(
SET
)
MENU
] key to store
the individual address.
12. To enter another individual address, repeat steps 5 through
12.
13. To exit this menu and return to radio operation mode press the [ 16/9
] key.
11.6.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
1. Press and hold down the [ CALL
(
SET
)
MENU
] key
until “ RADIO SETUP ” menu appears.
2. Press the [
] key to select “
DSC SETUP ” menu,
then press the [ CALL
(
SET
)
MENU
] key.
3. Press the [
] or [ ] key to select “
INDIVIDUAL RE-
PLY ” menu, then press the [ CALL
(
SET
)
MENU
] key.
4. Press the [
] or [ ] key to select “
AU
(Automatic)”
or “ oF
(Manual).”
5. Press the [ CALL
(
SET
)
MENU
]key to store the selected set-
ting.
6. To exit this menu and return to radio operation mode press the [ 16/9
] key.
11.6.3 Setting up the Individual / Group Call Ringer
When a Individual Call or Group Call is received the radio will produce a ringing
tone for 3 minutes. This selection allows the Individual / Group Call ringer time
to be changed.
1. Press and hold down the [ CALL
(
SET
)
MENU
] key
until “ RADIO SETUP ” menu appears.
2. Press the [
] key to select “
DSC SETUP ” menu,
then press the [ CALL
(
SET
)
MENU
] key.
3. Press the [
] or [ ] key to select “
INDIVIDUAL
RINGER ” menu, then press the [ CALL
(
SET
)
MENU
]
key.
4. Press the [
] or [ ] key to select ringing time of a
Individual/Group Call.
4 : 3 minutes continuously