Standard Horizon Matrix GX2000, Owner'S Manual, Page: 34 / 38

GX2000/GX2100 Page 3
4
10.15.2 Operating the FOG HORN mode
Operator can select from “Underway”, “Stop”, “Sail”, “Tow”, “Aground”, “An-
chor”, “Horn”, and “Siren”.
1. Press the [ PA
] key, then select “
Fog Fog Fog Fog Fog
” with the CH
knob.
2. Press the CH knob.
3. Turn the CH knob to select one of the eight func-
tions described above.
4. Press the CH knob.
5. On the “
Horn Horn Horn Horn Horn
” and “
Siren Siren Siren Siren Siren
” modes, press the PTT
switch to activate the tone (fog signal) through the
HAIL/PA speaker.
Turn the
CH knob to control the AF output level. The
AF output level can be set from 0 to 30 watts.
6. When the fog signal is not outputted, turn the PWR/
VOL knob to adjust listen back volume.
7. To exit the FOG HORN mode, press the [ CLR
(
WX
)] key.