HX407
Page 2
WARNING! FCC RF EXPOSURE REQUIREMENTS
This Radio has been tested and complies with the Federal Communications
Commission (FCC) RF exposure limits for Occupational Use/Controlled
exposure environment. In addition, it complies with the following Standards
and Guidelines:
FCC 96-326, Guidelines for Evaluating the Environmental Effects of Ra-
dio-Frequency Radiation.
FCC OET Bulletin 65 Edition 97-01 (2001) Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio Fre-
quency Electromagnetic Fields.
ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to
300 GHz.
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measure-
ment of Potentially Hazardous Electromagnetic Fields - RF and Micro-
wave.
WARNING:
This radio generates RF electromagnetic energy during transmit mode. This
radio is designed for and classified as
Occupational Use Only
, meaning
it must be used only during the course of employment by individuals aware
of the hazards, and the ways to minimize such hazards. This radio is not
intended for use by the General Population in an uncontrolled environment.
CAUTION:
To ensure that your expose to RF electromagnetic energy is within the
FCC allowable limits for occupational use, always adhere to the following
guidelines:
This radio is NOT approved for use by the general population in an un-
controlled exposure environment. This radio is restricted to occupational
use, work related operations only where the radio operator must have
the knowledge to control his or her RF exposure conditions.
When transmitting, hold the radio in a vertical position with its micro-
phone 1 inche (2.5 cm) away from your mouth and keep the antenna at
least 1 inches (2.5 cm) away from your head and body.
The radio must be used with a maximum operating duty cycle not ex-
ceeding 50%, in typical Push-to-Talk configurations.
DO NOT transmit for more than 50% of total radio use time (50% duty
cycle). Transmitting more than 50% of the time can cause FCC RF expo-
sure compliance requirements to be exceeded.
Application for FCC / IC
FCC ID: K6630394X20
IC: 511B-30394X20
