Page 31
9.2.2 EDIT
This selection is used to edit the FM Broadcast frequency and name.
1. Press and hold [
ENT/MENU
]
“
FM SETUP
”
“
EDIT
”
2. Press the [▲] or [▼] key to select
the
memory to be edited, then press the [
ENT/
MENU
] key.
3. Use the same procedure as described in steps 3 to 11 of “ADD” in the
previous section.
9.2.3 DELETE
This selection can delete the frequency data stored on an FM Broadcast memory.
1. Press and hold [
ENT/MENU
]
“
FM SETUP
”
“
DELETE
”
2. Press the [▲] or [▼] key to select the
memory to be deleted, then press the [
ENT/
MENU
] key.
The delete confirmation screen will appear.
3. Press the [▲] or [▼] key to select “
OK?
” (delete) or “
CANCEL
” (cancel),
then press the [
ENT/MENU
] key.
9.3 CONFIG
9.3.1 KEY BEEP
This selection is used to select the beep tone volume level when a key is
pressed.
1. Press and hold [
ENT/MENU
]
“
CONFIG
”
“
KEY BEEP
”
2. Press the [▲] or [▼] key to select the de
-
sired level. The beep level can be set from
“1” to “5”, or “OFF”.
3. Press the [
ENT/MENU
] key to store the se-
lected level.
4. Press the [
CLR
/
] key to return to radio operation.
