Standard Horizon HX40, Owner'S Manual And User'S Manual

Page: 24 / 52

Page 22
6. Press the [▲] or [▼] key to select “M-SCAN”
or “P-SCAN”.
7. Press the [ ENT/MENU ] key to store the selected setting.
8. Press the [ CLR / ] key to return to radio operation.
Memory Scan (M-SCAN)
Scan Memory
Channel
Scan Memory
Channel
Scan Memory
Channel
Scan Memory
Channel
Preset
Channel 4
Preset
Channel 5
Priority Channel
Preset
Channel 0
Preset
Channel 1
Preset
Channel 2
Preset
Channel 3
Priority Scan (P-SCAN)
8.9.3 SCANNING OPERATION
Memory Scanning (M-SCAN)
1. Set the scan type to “M-SCAN” in the SETUP menu (refer to “ 8.9.2 SE-
LECTING SCAN TYPE ”).
2. Press the [ SQL/VOL ] key twice, then press the [▲] or [▼] key until the
squelch background noise disappears.
3. Press the [◄] or [►] key repeatedly, until the [ SCAN ] soft key is selected
at the bottom of the LCD.
4. Press the [ ENT/MENU ] key.
“ MEM SCAN ” will appear on the display.
Scanning will proceed from the lowest to the
highest programmed channel number and
preset channel (described in the next sec-
tion). Scanning will stop on a channel when
a transmission is received.
The channel number will blink during recep-
tion.
5. To stop scanning, press the [
16/S
] or [
CLR
/ ] key.
Priority Scanning (P-SCAN)
1. Set the scan type to “P-SCAN” in the SETUP menu (refer to “ 8.9.2 SE-
LECTING SCAN TYPE ”).
2. Press the [ SQL/VOL ] key twice, then press the [▲] or [▼] key until the
squelch background noise disappears.
3. Press the [◄] or [►] key repeatedly, until the [ SCAN ] soft key is selected
at the bottom of the LCD.