HX370E
Page 21
5.16 VOICE SCRAMBLER UNIT
The optional
FVP-31
Voice Scrambler Unit permits secure voice communica-
tions with stations within your network, which prevents others from listening
using normal communication equipment.
To activate the Voice Scrambler:
1. Turn the radio off.
2. Hold down the
SQL
key, then turn on the transceiver while still holding
down the
SQL
key to enter the Setup Mode.
3. Press the
SQL
key momentarily to select the Menu item (
SCr
).
4. Press the [
] or [
] key momentarily select the scramble code (SC1,
SC2, SC3, or SC4).
5. When you have completed your selection, press the
SQL
key to save
the new setting, and then press the
PTT
switch to exit to normal operation.
6. To disable the Voice Scrambler, select “oFF” in step 4 above.
Installation of the FVP-31
1. Make sure that the transceiver is off. Remove the hard or soft case, if
used. Remove the battery pack.
2. Locate the connector for the
FVP-31
under the seal in the battery
compartment on the back of the transceiver, just peel off the seal.
3. Align the connector on the
FVP-31
with the transceiver’s connector
and gently press the unit into place.
4. Place the Sponge Sheet (supplied with the
HX370E
) on the
FVP-31
.
5. Affix the new (supplied with the
FVP-31
) caution seal, and replace
the battery. Installation is now complete.
Figure 5
Peel off the Seal
Locate Connector
Affix the new Seal
«
«
«
Sponge Sheet
Summary of Contents for HX370E
Page 1: ...HX370E HX370E VHF FM Marine Handheld Transceiver Owner s Manual ...
Page 37: ...HX370E Page 35 MEMO ...
Page 38: ...HX370E MEMO Page 36 ...
Page 39: ...HX370E ...
