Page 13
HX290
4.3.3 BATTERY CHARGING
1. Turn the transceiver off.
2. Insert the DC plug from the
PA-44B
into
the DC jack on the
CD-52
Charger Cradle
side panel, then plug the
PA-44B
into the
AC line outlet.
3. Insert the
HX290
(with the battery pack)
into the
CD-52
; the antenna should be at
the left side when viewing the charger from
the front.
4. If the
HX290
is inserted correctly, the LED
indicator will glow red. A fully-discharged
pack will be charged completely in ap-
proximately 6 hours.
5. When charging is completed, the red LED
indicator will change to green. Remove the
transceiver from the
CD-52
, and unplug
the
PA-44B
from the AC line outlet.
CAUTION
The
CD-52
Charger Cradle is NOT designed to be waterproof. Do not
attempt to charge in water hazardous locations.
NOTE
The
CD-52
Charger Cradle is only designed for the charging of the
HX290
’s battery, and is not suitable for other purposes. The
CD-52
may
contribute noise to TV and radio reception in the immediate vicinity, so
we do not recommend its use adjacent to such device.
PA-44B
CD-52