GX1100S
Page 54
procedure until all nine spaces of the MMSI num-
ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone’s [
H/L
] key until
the wrong nunber is selected, then move the chan-
nel knob to correct the entry.
7. When finished entering the MMSI number, press
and hold the [
ENT
] key.
8. Press the [
ENT
] key to send your position to the
selected vessel.
9. Press the [
CLR
(
WX
)] key to return the display to
the radio operation mode display.
11.9.3 Receiving a DSC Position Report Call
When another vessel transmits their location to the
GX1100S
the following will
happen:
1. When the Position Report Call is received, a ring-
ing sound will be produced and the display shows
received data. The
GX1100S
will also output NMEA
sentences (DSC and DSE) to a connected GPS
Chart Plotter.
2. Press any key to stop ringing.
3. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to change
the display to view the received data.
4. Press the [
CLR
(
WX
)] key to return the display to
the radio operation mode display.
