Standard Horizon Eclipse DSC+ GX1100S, Owner'S Manual

Page: 53 / 76

Page 53 GX1100S
11.9.2 Transmitting a DSC Position Report Call
Pre-Programmable Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC DSC DSC DSC DSC
MENU MENU
MENU MENU MENU
” will appear in the display.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect the “
POS REPORT POS REPORT
POS REPORT POS REPORT
POS REPORT
”.
3. Press the [ ENT
] key, then press the [
S
(
UP
)] /
[
T
(
DOWN
)] keys to select the category
(“
ROUITINE ROUITINE ROUITINE ROUITINE ROUITINE
” or “
SAFETY SAFETY SAFETY SAFETY SAFETY
”) for the Position Re-
port Call.
4. Press the [ ENT
] key to show the Position
Request Directory. This directory uses the
Individual Directory information.
5. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect a “Individual” you want to send your po-
sition to, then press the [
ENT
] key.
6. Press the [ ENT
] key again to send your po-
sition to the selected vessel.
7. Press the [ CLR
(
WX
)] key to return the display to
the radio operation mode display.
Manual Calling
You may enter an MMSI number manually to call without Setting up the Indi-
vidual / Position Call Directory.
1. Press the [ CALL
(
MENU
)] key. The “
DSC DSC
DSC DSC DSC
MENU MENU MENU MENU MENU
” will appear in the display.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to
select the “
POS SREPORT POS SREPORT POS SREPORT POS SREPORT POS SREPORT
”.
3. Press [ ENT
] key to show the Position Send direc-
tory. This directory uses the INDIVIDUAL Di-
rectory information.
4. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to
select “
MANUAL MANUAL
MANUAL MANUAL
MANUAL
”, then press the [ ENT
] key.
5. Enter the MMSI number (nine digits) which
you want to contact.
Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to scroll
through numbers, 0-9. To enter the desired num-
ber and move one space to the right, press the [
ENT
] key. Repeat this