DS35 User Manual
14
Dimensions
• 4.875W x 2.25D x 2H inches (124W x 57D x
51H mm)
Mounts
• Flush/Gimbal
Flush Mount
• 4.25 x 1.375 inch (108 x 35mm) hole
• Depth behind panel 2.25 inch (57mm)
Display
• Liquid Crystal 3½ digit numeric, 0.75in. (19mm)
high
Color
• Black or white
Water Integrity
• Front will withstand direct spray
Depth Display
• Feet:
3 to 200 (3 to 19.9 in tenths, 20 to 200 in
whole numbers)
• Meters:
0.8 to 61 (0.8 to 9.9 in tenths, 10 to 61 in
whole numbers)
• Fathoms
0.5 to 33 fathoms
Accuracy
• +/- 2%
Alarms
• Depth: shallow and deep, adjustable, non-volatile
6 Specifications
Options (keypad selectable)
• Illumination Intensity Level (3-step)
• Damping level (5, 10 & 15%)
• Keel Offset (Adjustable, +/- 10 units)
Trend Indication
• Up and down arrows
Sensitivity
• 0.4 mV RMS at 30+ feet
Transducer
• Transom, Thru-hull option, or In-hull options
600 ohm, 1500 pF parallel impedance
Frequency
• 201 +/- 1 kHz
Operating Voltage
• 13.8 VDC +/- 20%
Operating Temperature
• 32° to 122°F (0° to 50°)
Current Drain
• 70 mA nominal
Output Power
• 50 watts RMS
RF Interference
• 6 dB maximum quieting on any marine radio
channel with 3 dB gain antenna within 1 meter
of the DS35
Your depth sounder is designed for years of trouble free operation assuming proper installation and care are
provided. Following the operation and installation guidelines in this manual should ensure optimum performance
of the instrument. In the unlikely event that the instrument shall fail to perform or shall need servicing,
contact:-
7 Maintenance
Standard Horizon
Factory Repair Facility
115 North Wright Brothers Drive
Salt Lake City, UT 84116
Telephone number (800) 366-4566
Technical support telephone number (562) 404-2700
Fax number (801) 359-4122
E-mail address [email protected]
www.standardhorizon.com
