Read instructions carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment. Remove all components from
pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts as specified below.
It is recommended to use two or more person during the assembly process.
STANDARD
f u r n i t ure
HARDWARE LIST:
PART LIST:
No.
Description
Sketch
Qty'
Size
No.
Description
Sketch
Qty'
Cleaning instructions: Clean using soft cloth
Made in Vietnam
1 Allen Bolt
Ø 1 4'' x 50mm
8 pcs
2 Lock Washer
Ø516'' x 13mm 8 pcs
3 Flat Washer
Ø516'' x 19mm 8 pcs
5 Allen Key
1 pc
4 mm
A Bench Cushion
Frame
1 pc
B
Left Front Leg or
Right Back Leg
D Side Stretcher
2 pcs
E
ASSEMBLY INSTRUCTIONS
GROUP NO.: 11620 AUBURN HONEY DR
ITEM NO.: 11639 - COUNTER HEIGHT BENCH 1/CTN
4
Screw
8 pcs
Ø4 x40 mm
C
Right Front Leg or
Left Back Leg
sticker stick on the leg
L
sticker stick on the leg
R
2 pcs
2 pcs
Front Stretcher
2 pcs
Step 1: Place the Bench Cushion Frame (A) on a piece
of cloth or carpet to prevent from scratching.
- Attach the Left Front Leg (or Right Back Leg) (B) and
Right Front Leg (or Left Back Leg) (C) to Seat Cushion
Frame (A) by using Allen Bolt (1), Lock Washer (2),
Flat Washer (3) and Allen Key (5). Do not fully tighten.
- Attach the Side and Front Stretcher (D);(E) to the
middle of 4 Legs as the picture shown and insert the
Screw (4), secure with Phillips -head screw drivers (not
provided).
5
1 2
3
A
B
B
C
C
D
E
D
C
E
D
4
4
A
B
Step 1
Step 2
Step 2: Turn the Bench to upright position and place it on
flat surface and adjust legs so the Bench is level and does
not wobble. Tighten all Bolts and Screws with Allen Key (5)
(provided) and Phillips - head screw drivers (not provided).
Assembly product is completed .