STANDARD
f u r n i t u r e
Read instructions carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment. Remove all components from
pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts as specified below.
It is recommended to use one person during the assembly process.
ASSEMBLY INSTRUCTIONS
GROUP NO.: 11620 AUBURN HONEY DR
ITEM NO.: 11637 - UPH COUNTER HEIGHT CHAIR II 2/CTN
HARDWARE LIST:
PART LIST:
No.
Description
Sketch
Qty'
1
Long Bolt
Size
Ø1 4'' x 75mm 4 pcs
3 Short Bolt
Ø1 4'' x 40mm
4
Lock Washer
Ø516'' x 13mm
3 pcs
11 pcs
5
Flat Washer
Ø516'' x 19mm 11 pcs
6
Allen Key
1 pc
4 mm
No.
Description
Sketch
Qty'
A Chair Back
1 pc
B
Seat Cushion
Frame
1 pc
C Left Front Leg
Made in Vietnam
Cleaning instructions: Clean using soft cloth
7
Screw
6 pcs
Ø4 x40 mm
sticker stick under stretcher
sticker stick under stretcher
D
F
G
Right Front Leg
Left Side Stretcher
Right Side Stretcher
1 pc
1 pc
1 pc
Step 2
3
4
5
6
6
1
4
5
Step 1: Attach Seat Cushion Frame (B) to Chair Back (A) by
securing the Short Bolt (3), Lock Washer (4), Flat Washer (5) on
back rail and Long Bolt (1), Lock Washer (4), Flat Washer (5)
onto Corner, tighten with Allen Key (6). Do not fully tighten.
Step 2: Attach the Left and Right Front Legs (C);(D) to Seat
Cushion Frame (B) by using Medium Bolt (2), Lock Washer
(4), Flat Washer (5) and Allen Key (6). Do not fully tighten.
Attach the Front, Left side, Right side of Stretcher (E);(F);(G)
to Right, Left of Front Leg and Chair back by securing the
Screw (7) with Phillips-head screw drivers (not provided).
Step 3: Place the Chair on flat surface and adjust legs so that
chair is level and does not wobble. Tighten all Bolts and
Screws with Allen Key (6) provided and Phillips-head screw
drivers (not provided). Assembly product is completed .
R
L
2
Medium Bolt
Ø1 4'' x 50mm 4 pcs
E Front Stretcher
1 pc
1 pc
2 4
5
6
D
D
7
7
A
B
A
C
A
E
D
B
G
F