10
11
Rev. 05.03.2021
Rev. 05.03.2021
On
Off
GAS
AIR
Pulsation function switch-key = Additional pulsation function
makes it possible to prove more energy without the necessity
to significantly increase the temperature in the welded element.
Switch-key / Breaker switch
TIG / WIG connector
MMA connection
Foot-operated connector
Mass conduit connector
Gas / air connection at the rear side of the welder
15
16
17
18
TIG / WIG connector
19
20
21
22
Earthing = at the rear side of each and every welder there is
a bolt with earthing marking. Before starting, the device has to
be earthed with the conduit which cross section can not be
smaller than 6 mm. It could protect against voltage loss.
23
EN
EN
S-ALU 220 UK
