Stamina Titan 650 System, Owner'S Manual

Page: 8 / 22

ASSEMBLY INSTRUCTIONS
A
B
C
E
F
STEP 5
Run the
EYELET END
of the
TOP CABLE(23),
the longer one, through the slot at the front end of the
TOP BEAM(4).
Attach the
BALL END
of the
TOP CABLE(23)
to the
TOP BEAM(4)
at
A
with a
PULLEY(20),
a
BOLT(3/8" x 2 1/8")(60),
a
NYLOCK NUT(3/8")(67),
two
WASHERS(3/8")(65),
and two
PULLEY SPACERS(21).
Use the same hardware to attach the
TOP CABLE(23)
to the
TOP
BEAM(4)
at
B
and to the
MAIN UPRIGHT FRAME(2)
at
C.
Run the
EYELET END
of the
BOTTOM CABLE(24),
the shorter one, through the slot at the bottom end
of the
LOWER MAIN UPRIGHT(3).
Attach the
BALL END
of the
BOTTOM CABLE(24)
to the
LOWER
MAIN UPRIGHT(3)
at
D
with a
PULLEY(20),
a
BOLT(3/8" x 2 1/8")(60),
a
NYLOCK NUT(3/8")
(67),
two
WASHERS(3/8")(65),
and two
PULLEY SPACERS(21).
Connect the
EYELET END
of the
BOTTOM CABLE(24)
to the
TOP CABLE(23)
with the
CHAIN HOOK(25)
at
E.
Attach the
PULLEY BRACE(19)
to the
TOP CABLE(23)
at
F
with the
LARGE PULLEY(22),
a
BOLT
(3/8" x 2 1/8")(60),
a
NYLOCK NUT(3/8")(67),
and two
WASHERS(3/8")(65).
Connect the
PULLEY
BRACE(19)
to the
WEIGHT BAR SLIDER(14)
with a
CHAIN(26)
and two
CHAIN HOOKS(25).
NOTE: Proper cable tension is achieved when the
WEIGHT BAR SLIDER(14)
is just touching the
BUMPER(13).
You can adjust the length of the
CHAIN(26)
between the
PULLEY BRACE(19)
and the
WEIGHT BAR SLIDER(14)
to adjust the tension of the
CABLES.
D
8