Stamina Titan 650 System, Owner'S Manual

Page: 10 / 22

ASSEMBLY INSTRUCTIONS
STEP 9
Attach the
FRONT STABILIZER(34
) and the
REAR STABLIZER(35)
onto the
BENCH MAIN FRAME
(33)
with
BOLTS(M8 x 15mm)(57)
and
WASHERS(M8)(64).
NOTE: The
REAR STABILIZER(35)
is longer than the
FRONT STABILIZER(34).
STEP 10
Press the
ROUND ANGLE CAP(40)
onto the back side of the
LEG CURL FRAME(36).
Attach the
LEG CURL FRAME(36)
onto the
BENCH MAIN FRAME(33)
with
BOLT(3/8" x 2 1/2")(61),
WASHERS(3/8")(65),
and
NYLOCK NUT(3/8")(67).
NOTE: Please make sure the angle of the
ROUND ANGLE CAP(40)
matches with the
BENCH MAIN
FRAME(33).
STEP 11
Slide the
FOAM PAD(38)
onto the
PAD TUBE(37),
then insert the other end of the
PAD TUBE(37)
through the hole on the
BENCH MAIN FRAME(33).
Slide another
FOAM PAD(38)
over the protruding
end of the
PAD TUBE(37).
Repeat for the
LEG CURL FRAME (36).
Slide the
WEIGHT STOP(39)
onto the
WEIGHT TUBE
on the
LEG CURL FRAME(36).
WEIGHT TUBE
10