OPERATIONAL INSTRUCTIONS
12
LOAD ADJUSTMENT
To increase the load, turn the
TENSION KNOB(47)
clockwise. To
decrease the load, turn the
TENSION KNOB(47)
counterclockwise.
There are eight levels for the load adjustment.
NOTE:
The load will increase as you pull faster.
47
PEDAL STRAP ADJUSTMENT
If you feel it is more comfortable for your workout, you can attach the
PEDAL STRAP(37)
to the lower
position in the
PEDAL CAP(101)
as shown in illustration 1 below. Run the
PEDAL STRAP(37)
through the
opening from the bottom of the
PEDAL CAP(101).
Pull the
PEDAL STRAP(37)
to make the Knot against the
bottom of the
PEDAL CAP(101).
Run the
PEDAL STRAP(37)
through the opening in the
PEDAL CAP(101)
on the other side from the top as shown in the illustration 1, then make the end of the
PEDAL STRAP(37)
go up to attach onto the upper part of the
PEDAL STRAP(37)
with the Hook & Loop Pad.
Attach the end of the
PEDAL STRAP(37)
to different position with the Hook & Loop Pad to adjust the length.
Refer to illustration 2.
Hook & Loop Pad
Hook & Loop Pad
Knot
1.
2.
End of Pedal Strap
Summary of Contents for Stamina X 35-1102A
Page 20: ...NOTES 20...
Page 21: ...NOTES 21...
