ASSEMBLY INSTRUCTIONS
STEP 1:
STEP 2:
STEP 3:
NOTE:
2
Insert the STABILIZERS(2) into both ends of the MAIN FRAME(1) and secure
with BUTTON HEAD BOLTS(M8x1.25x12mm)(16) and ARC WASHERS(M8)(17).
DO NOT TIGHTEN COMPLETELY.
Adjust the STAND CAPS(3), set the
inSTRIDE CYCLE XL
on the floor and tighten
the bolts.
Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).
Slide the TIMER(18) onto the plate on the MAIN FRAME(1).
There are two adjustment holes on each side of the PEDAL STRAPS(12). Select
the adjustment holes which allow your feet to be easily removed from the
PEDALS(11).
MAINTENANCE
The safety and integrity designed into the
inSTRIDE CYCLE XL
can only be maintained
when the
inSTRIDE CYCLE XL
is regularly examined for damage and wear. Special
attention should be given to the following:
1.
2.
3.
4.
A light oil is applied to the pedals of your
inSTRIDE CYCLE XL
before shipping. Reapply
oil if the pedals begin squeaking.
Verify that all nuts and bolts are properly tightened.
Use only Stamina Products components for maintenance and repair. For replacement
parts, contact us at [email protected] or call 1-800-375-7520.
Keep your
inSTRIDE CYCLE XL
clean by wiping with an absorbent cloth after use.
