ASSEMBLY INSTRUCTIONS
7
Place the front end of the
RIGHT PEDAL ARM(5)
on the
ROLLER(40).
Connect the back end of the
RIGHT
PEDAL ARM(5)
to the
RIGHT CRANK(32)
located inside the
CRANK DISK(29)
as shown. Thread the
RIGHT PEDAL SHAFT(35)
into the
RIGHT CRANK(32)
and tighten securely.
Repeat on the left side.
STEP 4
There is a
"L"
decal on the
LEFT PEDAL CAP(38),
and a
"R"
decal on the
RIGHT PEDAL CAP(39).
Attach the
RIGHT PEDAL CAP(39)
onto the
RIGHT PEDAL ARM(5)
with
ROUND HEAD BOLTS
(M6x1x43mm)(53).
Repeat on the left side.
NOTE:
There is a
"L"
decal on the
LEFT PEDAL ARM(4),
and a
"R"
decal on the
RIGHT PEDAL
ARM(5).
The
RIGHT PEDAL SHAFT(35)
has right hand threads and is tightened by turning clockwise.
The
LEFT PEDAL SHAFT(34)
has left hand threads and is tightened by turning counter clockwise.
STEP 3
NOTE:
The
LEFT
and
RIGHT PEDAL CAPS(38, 39)
have a raised lip on two sides. Attach the
LEFT
and
RIGHT PEDAL CAPS(38, 39)
to the
LEFT
and
RIGHT PEDAL ARMS(4, 5)
so the raised lip is on
the front and the inner side.
1.
2.
R
L
R
L
Summary of Contents for INSTRIDE 55-1615
Page 16: ...PRODUCT PARTS DRAWING BACK FRONT 16 Strap Strap...
Page 20: ...20 NOTES...
Page 21: ...21 NOTES...
