background image

OPERATIONAL INSTRUCTIONS

10

EXERCISE WORKOUT

To start using the 

InMotion® Elliptical

 simply stand on the foot pedals with the front of your shoes close to 

the front edge of the pedal cap. Move your highest foot forward and follow the natural path of the machine.

For more stability, place a chair next to the 

InMotion® Elliptical

 and place your hand on the chair back 

while stepping onto the pedals. Start on a load level that is comfortable until you are familiar with the 

machine. Once you are familiar with the elliptical and comfortable with the resistance, adjust the load level 

as described below to achieve the workout desired.

LOAD LEVEL ADJUSTMENT

The load level of 

InMotion® Elliptical

 can be changed at any time 

during your workout. Adjusting your load level will allow you to increase 

or decrease your intensity level.

To  increase  the  load,  turn  the 

TENSION  KNOB(21)

  clockwise.  To 

decrease the load, turn the 

TENSION KNOB(21)

 counterclockwise.

FORWARD AND REVERSE

The 

InMotion® Elliptical

 can be used in forward and reverse directions to vary the muscles that you work. 

This will help you to stay motivated and achieve the best results. To change directions, simply slow the 

pedals down until they stop, then pedal in the opposite direction.

Cavity

SITTING WORKOUT

Refer to the illustration. Seated workouts are effective for toning legs and hips, and for improving 

circulation and mobility. When sitting, your feet will face the opposite direction on the pedals than when 

standing. This will put your feet, ankles, and hips at the proper workout angles. To adjust the 

METER(22) 

to face you, find the two cavities on either side of the meter case, grasp the top of the meter and pull 

the top of the 

METER(22)

 from the casing being careful not to disconnect or damage the 

SENSOR 

WIRE(23).

 Turn the meter 180 degrees, and push it back into position.

Place the 

InMotion® Elliptical

 on the floor in front of a chair as shown in the illustration below. Sit in the 

chair and pedal the 

InMotion® Elliptical

 with your feet.

CAUTION:

 Do not stand up on the 

InMotion® Elliptical

 in this workout position.

Summary of Contents for InMotion 55-1602




















Reviews: