1. To store the
inLine® Inversion System,
simply keep it in a clean dry place.
2. Move the
inLine® Inversion System
by lifting the frame and moving slowly.
NOTE:
Two people are required to move the
inLine® Inversion System.
The safety and integrity designed into the
inLine® Inversion System
can only be maintained when the
inLine® Inversion System
is regularly examined for damage and wear. Special attention should be
given to the following:
1. Check the pivot arms, cushions, foam pads, and foam pads adjustment device for damage and wear.
2. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
3. Verify that the
WARNING LABEL(50)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
WARNING LABEL(50)
if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the
inLine® Inversion System
removed from service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the
inLine® Inversion
System.
7. Keep your
inLine® Inversion System
clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
12
Summary of Contents for inLine 55-1510
Page 14: ...PRODUCT PARTS DRAWING 14 BACK FRONT...
Page 17: ...NOTES 17...
