11
OPERATIONAL INSTRUCTIONS
GENERAL PRECAUTIONS
1. Do not use the
inLine® Inversion System
alone. Always have a helper available in case assistance is
needed in recovering from the decline position.
2. Make sure that the
FOAM PADS(21)
are holding your feet properly.
3. Make sure that there is enough room for the
inLine® Inversion System
to rotate completely.
FOAM PAD USE AND ADJUSTMENT
1. Place your feet under the
FOAM PADS(21)
with your ankles
between the
FOAM PADS(21).
2. There are four adjustment holes in the
PAD SUPPORT(7)
which
allow you to set the
FOAM PADS(21)
on the
PAD SUPPORT(7)
at different heights. These
FOAM PADS(21)
rest underneath
your knees during use of the unit.
Pull the
SPRING PIN(24)
and slide the
PAD SUPPORT(7)
in
and out to adjust. Release the
SPRING PIN(24)
to lock the
PAD
SUPPORT(7)
in one of the adjustment holes.
THE HANDRAILS
The
HANDRAILS(12)
are located on both sides of the
inLine®
Inversion System.
The
HANDRAILS(12)
are to help you return
from inversion to the upright position. When inverted, use the
HANDRAILS(12)
to pull yourself up to the upright position.
Summary of Contents for inLine 55-1510
Page 14: ...PRODUCT PARTS DRAWING 14 BACK FRONT...
Page 17: ...NOTES 17...
