background image

OPERATIONAL INSTRUCTIONS

12

Functions:

Seat movement or press the button.

Automatically shuts off after four 

minutes of inactivity.

SCAN:

COUNT:

TIME:

CALORIES:

Automatically scans each function of 

TIME, COUNT, CALORIES,

 and 

TOTAL COUNT

 in 

sequence with a change every six seconds. Press and release the button until 

"SCAN"

 

appears on the display.

Displays the elapsed time from 1 sec up to 99:59 minutes.

Displays the total number of rows you have taken from zero to 9999 rows.

Displays the calorie burned from zero to 9999 Kcal.

The calorie readout is an estimate for an average user. It should be used only as a comparison 

between workouts on this unit.

Displays the total accumulated number of rows you have taken from zero to 9999 rows.  

The total accumulated rows is retained when the meter is turned off, until the battery is 

removed.

HOW TO INSTALL AND REPLACE BATTERIES:

1.  Open the Battery Door on the back of the meter.

2. The meter operates with a AA battery, the battery is not included. 

Refer to the illustration to install or replace the battery.

AA Battery

TOTAL COUNT:

The meter will shut off automatically after four minutes of inactivity. All function values will be 

kept. Press the button and hold it down for two seconds to reset all functions to zero, except 

TOTAL COUNT.

NOTE:

USING THE FITNESS METER

POWER OFF :

POWER  ON :

MODE BUTTON:

Press to select display functions, including 

SCAN, TIME, 

COUNT, CALORIES,

 and 

TOTAL COUNT.

Press and hold for two seconds to reset all functions to 

zero, except 

TOTAL COUNT.

1.  Rechargeable batteries are not recommended.

2. Ultimate disposal of battery should be handled 

according to all state and federal laws and regulations.

3.  Do not dispose of batteries in fire.

NOTE:

Summary of Contents for BODYTRAC GLIDER 1060























Reviews: