STEP 2:
Thread the
NUTS(3/8"-16)(79)
all the way to the bottom of the threaded rod on the
STANDS(59).
Lift the front stabilizer on the
MAIN FRAME(1)
and place a temporary spacer (wood block or thick book)
under the front of the
MAIN FRAME(1).
Thread the three
STANDS(59)
into the
MAIN FRAME(1).
Remove
the temporary spacer.
NOTE:
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at:
7
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the
REAR STABILIZER(2)
to the
MAIN FRAME(1)
with
BUTTON HEAD BOLTS
(M10x1.5x25mm)(64), WASHERS(M10)(78),
and
LOCK WASHERS(M10)(76).
See page 12 for detailed leveling instructions to prevent rocking.
Make the tab face down
for assembly.
Lift from the
Front Stabilizer
It will be easier to attach the
PEDAL CAPS(29L, 29R)
to the
PEDAL ARMS(6, 7)
by raising the
PEDAL ARMS(6,7)
and then attaching the
PEDAL CAPS(29L, 29R).
Please have a partner hold
the raised pedal arm as you attach the
PEDAL CAPS(29L, 29R).
This way you are not lying on the
floor trying to attach the
PEDAL CAPS(29L, 29R).
STEP 4:
Attach the
PEDAL CAP(29L)
to the
LEFT PEDAL ARM(6)
and the
PEDAL CAP(29R)
to the
RIGHT PEDAL ARM( 7)
with
SOCKET HEAD BOLTS(M6x1x12mm)(65).
NOTE:
STEP 3:
Make the tab in the edge of the
OVAL ENDCAPS(58)
face down, then press the
OVAL ENDCAPS
(58)
into both ends of the front stabilizer of the
MAIN FRAME(1).
R
L
