7
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at :
STEP 1
Remove your
AeroPilates Premier 690
from its packaging placing the product on its side, with the
LOCKING
PIN(29)
side upward. Remove the
LOCKING PIN(29)
and unfold the
MAIN FRAME ASSEMBLY
separating
the half that has the attached
LOCKING PIN(29).
When completed, the frame should be separated
approximately three feet at the end.
STEP 2
Attach the four
RUBBER FEET(28)
to the
FRONT FRAME(1)
and
REAR FRAME(2)
with
ROUND HEAD
SCREWS(M5x0.8x25mm)(38).
Attach the
WHEELS(27)
to the
FRONT FRAME(1)
with
WASHERS(M8)(47)
and
NYLOCK NUTS(M8x1.25)(42).
STEP 3
Unfold your
AeroPilates Premier 690
to a flat position by moving the
FRONT FRAME(1)
away from the
platform end of the product in a clockwise position until fully extended.
Summary of Contents for 55-4690
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK ...
Page 18: ...NOTES 18 ...
