ASSEMBLY INSTRUCTIONS
7
STEP 1
Remove your
AeroPilates Performer 298
from its packaging, placing the product on its side with the
LOCKING PIN(26)
side upward. Remove the
LOCKING PIN(26)
and unfold the
MAIN FRAME ASSEMBLY
separating the half that has the attached
LOCKING PIN(26).
When completed, the frame should be separated
approximately 3 feet at the end.
STEP 2
Attach the four
RUBBER FEET(25)
to the
FRONT FRAME(1)
and
REAR FRAME(2)
with
ROUND HEAD
SCREWS(M5x0.8x35mm)(37).
The
ROUND HEAD SCREWS(M5X0.8X35mm)(37)
are already in the
RUBBER FEET(25).
Attach the
PLASTIC WHEELS(24)
onto the
FRONT FRAME(1)
with
WASHERS(M8)(46)
and
NYLOCK NUTS(M8)(40).
STEP 3
Unfold your
AeroPilates Performer 298
to a flat position by moving the
FRONT FRAME(1)
away from
the platform end of the product in a clockwise position until fully extended.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call
our toll-free number for assistance 1-800-375-7520 or e-mail us at [email protected].
Summary of Contents for 55-4298
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Page 18: ...18 NOTES...
