background image

L

R

L

R

ASSEMBLY INSTRUCTIONS

STEP 7

NOTE:   1. There is an “L” decal on the LEFT PEDAL ARM(4), and an “R” decal on the RIGHT

PEDAL
ARM(5).

        2. The RIGHT PEDAL SHAFT(46) has right hand threads and is tightened by turning clockwise.
The LEFT PEDAL SHAFT(45) has left hand threads and is tightened by turning counterclockwise.

Place the front end of the RIGHT PEDAL ARM(5) on the ROLLER(60) of the FRONT STABILIZER(2).
Connect the back end of the RIGHT PEDAL ARM(5) to the RIGHT CRANK(42).  Thread the RIGHT
PEDAL SHAFT(46) 
into the RIGHT CRANK (42) by hand. SECURELY TIGHTEN using a 15mm open-
ended wrench or an adjustable wrench (not included).  Repeat on the left side.  

The shoulder of the

PEDAL SHAFT(45, 46) should be in contact with the CRANK(41, 42) when securely tightened.

Check the tightness of the PEDAL SHAFT(45, 46) and CRANK(41, 42) regularly.  Retighten as
necessary.

8

 

WARNING! 

The PEDAL SHAFT(45, 46) must be securely tightened to the CRANK(41, 42).  Failure 

to securely tighten may cause the PEDAL SHAFT(45, 46) to become loose from the 

CRANK(41, 42) and may result in serious injury to user and damage to product.  The 

shoulder of the PEDAL SHAFT(45, 46) should be in contact with the CRANK(41, 42) 

when securely tightened. 

STEP 8

There is an “L” decal on the LEFT PEDAL CAP(50), and an “R” decal on the RIGHT PEDAL
CAP(51).  
Attach the RIGHT PEDAL CAP(51) to the RIGHT PEDAL ARM(5) with ROUND HEAD
SCREW(M5 x 15mm)(76)
.  Repeat on the left side.
NOTE:  The LEFT and RIGHT PEDAL CAPS(50, 51) have a raised lip on two sides.  Attach the LEFT
and RIGHT PEDAL CAPS(50, 51) to the LEFT and RIGHT PEDAL ARMS(4, 5) so the raised lip is on
the front and the inner sides.

Summary of Contents for 55-1723























Reviews: