ASSEMBLY INSTRUCTIONS
7
STEP 1
Attach the
REAR STABILIZER(2)
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M10x1.5x43mm)
(42)
and
NYLOCK NUTS(M10x1.5)(51).
STEP 2
Attach the
BASE BOARD(37)
to the
MAIN FRAME(1)
with the
STANDS(40)
and
BUTTON HEAD
BOLTS(M8x1.25x16mm)(59).
STEP 3
Attach the
LEFT PEDAL CAP(33)
to the
LEFT PEDAL ARM(3)
with
BUTTON HEAD BOLTS
(M8x1.25x20mm)(45).
Repeat on the other side.
NOTE:
The
LEFT
and
RIGHT PEDAL CAPS(33, 34)
have a raised lip on three sides. Attach the
LEFT
and
RIGHT PEDAL CAPS(33, 34)
to the
LEFT
and
RIGHT PEDAL ARMS(3, 4)
so that the side
without the raised lip is on the outside.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Summary of Contents for 55-1616A
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Page 18: ...NOTES 18...
