13
13
13
16
12
56
55
56
55
6
5
49
1
49
5
1
3
19
19
ASSEMBLY INSTRUCTIONS
8
STEP 1
Refer to the detail view. Pull out the
PULL PIN(49)
from the
MAIN FRAME(1).
Unfold the
FRONT
SUPPORT(5)
and lock in position with the
PULL PIN(49).
Attach the
FRONT STABILIZER(6)
to the
FRONT
SUPPORT(5)
with
ACORN NUTS(M8x1.25)(55)
and
ARC WASHERS(M8)(56).
STEP 2
Pull the
SPRING KNOB(16),
then unfold the
REAR SUPPORT(12)
and lock in one of the incline positions
with the
SPRING KNOB(16).
Insert the
REAR STABILIZER(3)
into the
REAR SUPPORT(12)
and secure
with
BUTTON HEAD BOLTS w/ WASHERS(M8x1.25x16mm)(13).
Turn the
LEVELING ENDCAPS(19)
on the
REAR STABILIZER(3)
as needed until the unit is steady and not rocking.
NOTE:
There are three adjustment holes in the bracket on the
MAIN FRAME(1)
which allow the
REAR
SUPPORT(12)
to be attached in three different
incline positions.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [email protected], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on
Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
Summary of Contents for 55-1465
Page 2: ...EasyDecompress...
Page 18: ...NOTES 18...
