Stamina 35-1050, Owner'S Manual, Page: 8 / 22

ASSEMBLY INSTRUCTIONS
8
STEP 4
Insert the
PEDAL SHAFT(32)
through holes located on the
METER POST(31).
Place a
PEDAL
SPACER(33)
and a
PEDAL(34)
onto each end of the
PEDAL SHAFT(32)
and slide them toward the
METER POST(31).
Then secure the
PEDALS(34)
with
BOLTS(M8 x 15mm)(51)
and
LARGE
WASHERS(M8)(36)
at both ends of the
PEDAL SHAFT(32).
NOTE:
STEP 5
Remove the
LOCKING KNOBS(13)
from the
PIVOT CONNECTOR(10).
You need to use two Allen Wrenches to tighten the
BOLTS(M8 x 15mm)(51)
at both ends of the
PEDAL SHAFT(32)
at the same time.