ASSEMBLY INSTRUCTIONS
10
STEP 10
NOTE:
The
RIGHT HANDLEBAR SHAFT(107)
has an
R
stamped on the end of the handlebar shaft. The
RIGHT HANDLEBAR SHAFT(107)
has right hand threads and is tightened by turning clockwise.
The
LEFT HANDLEBAR SHAFT(114)
has an
L
stamped on the end of the pedal shaft. The
LEFT
HANDLEBAR SHAFT(114)
has left hand threads and is tightened by turning counterclockwise.
Attach the
HANDLEBAR(118)
to the right side by threading the
RIGHT HANDLEBAR SHAFT(107)
to the
RIGHT HANDLEBAR CRANK(113)
and tighten securely. The shoulder of the
HANDLEBAR SHAFT
S(107,
114)
should be in contact with the
HANDLEBAR CRANKS(112, 113)
when securely tightened.
Repeat on the left side in order to attach the other
HANDLEBAR(118)
to the
LEFT HANDLEBAR CRANK
(112).
STEP 11
Install two AAA batteries into the
METER(124),
the batteries are not included. See page 12 for detailed
battery installation instructions. Insert the
METER(124)
onto the
METER PLATE(121).
Refer to the detail
view. Connect the
UPPER SENSOR WIRE(123)
to the short connecting wire of the
METER(124).
Plug the
Coil Connection Wire of the
METER(124)
into the socket of the
SENSOR WIRE(51)
which located at the
front of the
UPRIGHT(3).
Shoulder
Shoulder