13
33
35
34
36
4
32
59
59
60
60
42
1
ASSEMBLY INSTRUCTIONS
9
STEP 3
NOTE:
The
RIGHT PEDAL(34)
has an
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL
(34)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(33)
has an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(33)
has left hand threads and is tightened
by turning counterclockwise.
Thread the
RIGHT PEDAL(34)
into the right side of the
CRANK(13)
as shown. Tighten the pedal securely.
The shoulder of the
PEDALS(33, 34)
should be in contact with the
CRANK(13)
when securely tightened.
Select the
RIGHT PEDAL STRAP(36)
which has an
R
marked on it. Snap the three hole end to the inside
edge of the
RIGHT PEDAL(34).
Snap the other end of the strap to the hook on the outside edge of the
RIGHT PEDAL(34).
Select adjustment holes which allow your foot to be easily removed from the pedals.
Use the same procedure to attach the
LEFT PEDAL(33)
to the
CRANK(13)
and to attach the
LEFT PEDAL
STRAP(35)
to the
LEFT PEDAL(33).
STEP 4
Attach the
SEAT(32)
to the
SEAT POST(4)
with
NYLOCK NUTS(M8x1.25)(60)
and
WASHERS(M8)(59).
Insert the
SEAT POST(4)
into the
MAIN FRAME(1)
and secure with the
ADJUSTMENT KNOB(42).
NOTE:
The pin of the
ADJUSTMENT KNOB(42)
must be inserted into one of the adjustment holes in the
SEAT POST(4)
and the
ADJUSTMENT KNOB(42)
must be screwed in tight to ensure that the
SEAT POST(4)
will fit securely in the
MAIN FRAME(1).
Shoulder
Shoulder
Summary of Contents for 1308
Page 22: ...NOTES 22 ...
