Place the
1305 Indoor Cycle
in the area where it will be used. It is recommended that the
1305 Indoor
Cycle
be placed on an equipment mat. The
1305 Indoor Cycle
is approximately 40.7 inches long x 19.1
inches wide x 48.3 inches tall. An area 4 feet wide x 6 feet long is required for safe operation of the
1305
Indoor Cycle.
Make sure that adequate space is available for access to and passage around the
1305
Indoor Cycle.
LEVELING:
Adjust the
LEVELING CAPS(37)
on the
REAR SUPPORT(2)
so that the
1305 Indoor
Cycle
sits on the floor without rocking.
MOVING:
The
1305 Indoor Cycle
must be lifted to be moved. Two people are required to grasp the
HANDLEBAR(6)
and the rear stabilizer on the
REAR SUPPORT(2),
lift and move.
CAUTION:
Locate and read the
WARNING LABEL(55)
on the
1305 Indoor Cycle.
Make sure that all
users read the
WARNING LABEL(55).
SET UP INSTRUCTIONS
12
FUNCTION INSPECTION:
Visually inspect the
1305 Indoor Cycle
to verify that assembly is as shown in the above illustration. Check
the function of the
1305 Indoor Cycle
by turning the crank slowly through one complete revolution to verify
that the drive train functions properly. Adjust the
TENSION KNOB(24)
to verify that the adjustable tension
is working properly.
Equipment Mat
