Stalgast 965001, User Manual

Page: 7 / 8

- 7 -
EN
Do not move the unit:
• when the power cord is plugged into an outlet,
•
when dishes or other objects are placed on the unit,
• and other situations that pose a threat to the health or life of the operator
5.3. Combining 700 line adjustable units on an oven:
To connect the adjustable appliances to the oven, take turns:
1. Remove the feet from the oven-mounted appliance(s)
2. Install the connectors supplied with the oven properly- rear (with sheet metal screws removed from-
the rear housing) and front (with screws removed from the front housing). Do not install theconnec-
tors in the middle when the adjustable appliance is 800mm wide.
3.
Position the appliance(s) on the oven.
4.
Screw the devices together (with sheet metal screws removed from the rear housing and supplied-
with the connectors).
6. CLEANING AND MAINTENANCE
Disconnect the unit from the power source before performing any maintenance.
Daily maintenance c
onsists of emptying the bowl and washing it and the heaters with a cloth dampened
in water with washing-up liquid and then wiping with a dry cloth
Once a month,
please check whether:
•
the condition of the appliance’s electrical system is correct (the cord is not damaged, the heater does
not show signs of damage, etc.).
• all the components of the device are working properly.
mount to the unit using the screws mount to the unit using the screws
installed in the unit installed in the unit
Rear connectors - straight Rear connectors - straight
Front connector - bent Front connector - bent
mount to the unit using the screws mount to the unit using the screws
installed in the unit installed in the unit